Astralis Orgone is a Dual Sample based Synthesizer which will run in PC
VST Hosts. It is the next generation of the Astralis Range and is
highly optimized with great improvements in CPU use and especially load
times. 8 months of programming has gone into making these improvements
and added many new features and GUI enhancements. It is a rounded synth
capable of sounds ranging from Trance Style Rhythms to Hard Leads and
excels at Pads, Atmospheres and FX. Great care has been taken into
developing a logical layout and many useful control features such as
double click resets and CTRL fine control adjustments. Orgone can be
purchased individually or as part of the Astralis Pack which
entitles the owner to both current and future Astralis
instruments/effects with no extra cost.
Here is a list of Main Features:
- 2 Independent Synthesizer sections each having:
- A Sampler which uses 16/24/32bit WAVS.
- 150 wavs included.
- Filter with Low Pass, Hi Pass, Notch, Band Pass, Peak A
and Peak B modes cascadable up to 8 times.
- Volume, Pan, Octave, Semi and Fine Tune controls
- Auto Levelling Drive
- Drive
- White Noise
- FX Send
- Lofi
- Normalize
- Velocity Sensitivity
- GUI Volume Envelope with up to 32 stages and repeating
range.
- Zone - Limit to a range of the keyboard
- Pitch Bend Enable
- Microtuner Enable
- Glide
- Filter Range Limit
- Sample Reverse
- Sample Loop Alternate Mode
- Sample Loop Zero Crossing.
- GUI Wave Display and Overlay for visually editing Loop
Points and Start Position.
- Unique Bank System for handling samples - Emulates a
hardware Synth with Bank dropdown menu and a dropdown to select the
sample from this bank. banks are simply folders of WAVs in the user
selectable sample store location. Creating a bank is simply a case of
creating a folder and putting some samples inside.
- Refresh Files
- Rescans the hard drive to find newly added files without
restarting the Synth.
- Polyphonic Gate Sequencer / Trancegate
- 32 Note Sequencer with GUI buttons
- 4 Modes - Forward, Reverse, Random and Alternate.
- Polarity mode for Synth 2's gate can play All Off Notes,
or First Off Note following an On Note.
- Shift pattern left Right
- Flip Pattern
- Modulation Matrix:
- 12 Possible Sources that can be mapped to 5 destinations
from a choice of 31.
- Gapper
- Up to 32 Step sequencer to control the Gapper Pattern
- 4 Modes - Forward, Reverse, Random and Alternate.
- Release Time
- Pulse Width
- Attack Time
- Mix Level
- Shift pattern left or Right
- Flip Pattern
- Low Frequency Oscillator
- 17 waveforms used through the Modulation Matrix.
- BPM or Free Mode.
- Fully Featured Arpeggiator/ Note Sequencer:
- 17 Different Modes (more to come!)
- Latch Mode
- Pulse Width
- Note Sequencer Mode with up to 32 steps
- Note Enabler for skipping steps in any ARP Mode.
- Range - Limit to a section of the Keyboard.
- FX section:
- Parallel Routing Mode and all possible combinations of
chained effects (127 modes)
- Reverb
- Echo
- Ring Modulator
- Stereo BPM/Freeform Delay
- Flanger
- LFO based Filter with Low Pass, Hi Pass, Notch, Band
Pass, Peak A and Peak B modes
- Organic - Unique Delay Based effect
- Compressor
- 8 Band Graphic Equalizer
- Polyphonic BPM based Modulation Sequencer:
- Can be used via the Modulation Matrix
- Has direct Pitch sends to each synth with many modes plus
ability to send through the current Microtuner Patch.
- Keyboard Range - can be limited to a section of the
Keyboard.
- Smooth Mode for creating legato or using as a virtual LFO
- Secondary Raw Output via the Modulation Matrix
- Shift pattern left or Right
- Flip Pattern
- GUI Slider Bars lockable to notes depending on selected
mode.
- Monophonic Modulation Sequencer:
- As above but mono and without the Pitch Sends.
- 32 Stage General Purpose Envelope
- Used via the Modulation Matrix.
- Spread:
- Automatic Stereo randomization, switchable per Synth.
- 4 Octave Preview Keyboard:
- Can use Sticky Keys for easy hands free editing of patches
- Can behave as a normal Keyboard
- Animates all incoming midi data
- Scroll Mode can be swicthed off in which case mouse
left/right operates pitch bend, up/down the Mod Wheel
- Midi Reset (Panic)
- Midi Retrigger - Retriggers any incoming midi notes.
- Sophisticated Randomization System:
- A single Random Button is used to randomize all sections
selected in the Randomization mixer.
- 30 Sections are selectable.
- FX has its own Randomize Button, will randomize only the
selected Effects.
- Randomization has been carefully limited to the most
useful setting to ensure more chance of a usable patch.
- Every control has its own min/max set to ensure a useful
outcome!
- Additionally Local Randomizers are everwhere throughout
the synth for each section.
- Microtonal Tuner:
- Directly uses Scala Files.
- Uses the same bank/patch system as the Sample System,
folders can simply be added to the user selected MT Patch location.
- Up to 127 Note Scales supported
- Does not use Midi to retune like many other systems which
means that Pitch Bend can be used with MT patches.
- Octave Stretch for Acoustic Instrument Simulation
- Root Offset Tuning
- Hz Based Tuning
- Has 4 Note Layout Modes to provide flexibility on how
patches are used.
- Unused notes switchable between last note or Octave note.
- Switchable per Synth so for example Pythagorean tuning
can be overlaid on the Eaqual Temperement for a harmonically
interesting sound.
- Default Settings:
- Most controls have an in built default setting, generally
double clicking will reset to this value.
- Also each section has a Default Button.
- There is a Master Default Button which will set Most
setting to the default patch. as a simple starting point.
- Information Display:
- All controls display their current value when manually
tweaked, usually in percentages.
More Images:
This Synth uses many custom modules plus various modules created by
Chris Kerry